| General parameters |
| Model |
ZENITH 80
|
| Frequency band |
80 GHz (license free) |
| Frequency range |
71-76 / 81-86 GHz |
Duplex spacing
|
10 GHz |
| Channel bandwidth |
1150 MHz |
| Transmission capacity |
1150 (1000+150) Mbps full duplex |
| Modulation |
DBPSK |
| Latency |
0.012 ms |
| Forward error correction |
Reed-Salomon |
System configurations
|
1+0, 1+1 nebo 2+0 |
| MW parameters |
| Max. TX power |
+20 dBm |
| Automatic power control |
ATPC |
| Frequency stability |
< 10 ppm |
| Threshold sensitivity for 1150 Mbps |
-63 dBm |
| Interfaces |
| Protected terminal box |
ALS1-GEth (RP) / ALS1-2GEth (RP) |
| Line2 |
Ethernet 1000/100/10Base-T, connector RJ-45 on the protected teminal box |
| Line3 |
Ethernet 1000/100/10Base-T, connector RJ-45 on the protected teminal box |
| Line4 |
SFP (optical or copper interface) |
| Ethernet |
| |
Two independent Ethernet lines through radio link |
| Maximal packet size (MTU) |
10240 B |
| Supports |
VLAN (802.1Q), QinQ (802.1ad), QoS (802.1p) |
| NMS options |
| |
Ethernet (TCP/IP) - In band or out of band management |
| |
Serial port RS232 |
| |
SNMP v1 |
| Antennas |
| 1 ft (mid band gain) |
45.5 dBi |
| 2 ft (mid band gain) |
51 dBi |
| 3 ft (mid band gain) |
- dBi |
| 4 ft (mid band gain) |
- dBi |
| Class |
ETSI Class 2 or 3 |
| Polarization |
Vertical or Horizontal |
Large diameter antenans
|
from other producers
|
Power supply and cabling
|
| Range |
48 V DC (36-72 V) |
| Powe consumption |
40 W |
| ODU connection |
S-STP/S-FTP Cat.7 up to 100 m /optical fiber |
| Operating temperature |
| ODU |
-35 to +55 °C |
| Protected terminal box |
-25 to +55 °C |
| ODU / Terminal box Dimensions and Weight |
| ODU |
255 x 309 x 175 mm / 6.4 kg |
Protected terminal box
|
147 x 44 x 163 mm / 0.4 kg |
|
