| General parameters |
| Type |
ZENITH C |
| Band |
80 GHz |
| Band |
License free / Light licensed / Licensed |
| Frequency range (GHz) |
71 - 76 / 81 - 86 |
| Duplex spacing (GHz) |
10 |
| Channel bandwidth (MHz) |
250 / 500 |
| Modulation scheme |
QPSK - 256 QAM |
| Transmission capacity (Mbps) |
2600 full duplex (5000 aggregate) |
| Frequency stability |
< 10 ppm |
| Forward error correction FEC |
Reed-Salomon |
| System configurations |
1+0, 1+1, 2+0 |
| Radio Parameters |
| Receiver sensitivity for 10-6 (dBm) |
|
| Output power max.(dBm) |
up to 20 based on modulation used |
| Automatic power control |
ATPC |
| ACM |
Hitless ACM |
| User interfaces |
| Ethernet interfaces |
1× 1000Base-T, 1× 1000 Base-X + 1x 2500Base-X or 10000Base-X |
| Maximal packet length |
9600 bytes |
| Supports |
VLAN, Auto Negotiation or manual setting 1000 / 100 / 10 and Full / Half Duplex, QoS, Flow Control, Auto MDIX, Master / Slave |
| Control and diagnostic system |
| Management port |
In-band GUI |
| Supports |
SNMPv1, SNMPv2, SNMPv3 |
| ODU connection |
| Cable type |
S-STP/S-FTP Cat.7 cable is conected to cutting strips “KRONE” both in ODU and protected terminal box |
| Cable length |
Up to 90 m for Ethernet 1000Base-T, up to 100 m for 100Base-TX and up to 250 m for 10Base-T |
| Optical cable |
Fibre optic cable is determinated by used SFP module |
| Antennas |
| 0.35 m gain mid band (dBi) |
45.5 |
| 0.65 m gain mid band (dBi) |
51 |
| Class |
ETSI Class 2 |
| Polarization |
Vertical or horizontal |
| Power supply |
| Power supply |
48 V DC (36-72) |
| Power consumption |
Up to 36 W |
| Temperature range |
| Outdoor unit |
-35 to +55 °C |
| Protected terminal box |
-25 to +55 °C |
| Dimensions (w x h x d) and weight |
| Outdoor unit |
22 × 28 × 16.5 cm / 5.9 kg |
| Protected terminal box |
4.7 × 16.3 × 4.4 / 0.5 kg |
| Antenna 0.35 m |
8.1 kg |
| Antenna 0.65 m |
11 kg |
