• English
  • Español
  • United States
  • Česky
  • Pусский

ZENITH X - Technical parameters

Technical specifications  
   
 General parameters
 Type ZENITH X ST | ZENITH X DT
 Band 6 | 11 | 13 | 18 | 23 | 38 GHz
 Duplex spacing (MHz) 160, 252.04, 340 | 490, 500, 530 | 225, 266 | 1010, 1560 | 1008, 1200, 1232 | 1260
 Channel bandwidth (MHz) 7 – 224 MHz/240 MHz
 Modulation scheme QPSK - 4096 QAM
 Transmission capacity   up to 7.6 Gbps full-duplex for 2x(2+0 XPIC) with 2xZENITH DT  
 (balanced mode)  up to 1.9 Gbps full-duplex (Single ZENITH ST)
   up to 3.8 Gbps full-duplex (Single ZENITH DT)
  up to 25% capacity increase with traffic compression
 Frequency stability  < 10 ppm 
 Forward error correction FEC Reed-Salomon 
 System configurations 1+0, 1+0 SD, 1+0 FD, 2+0 SD, 2 x (1+0), 2+0 ACAP/ACCP, 4+0 ACAP/ACCP, 1+1, 2+2, 2 x (2+0 XPIC), 2x2 MIMO, 4x4 MIMO
 Radio Parameters
 Transceiver ZENITH X ST - single transceiver, dual sub-carriers; ZENITH X DT - double transceiver, each with dual sub-carriers 
 Output power max. (dBm) up to +27 based on modulation used
 Automatic power control ATPC, RTPC, Advanced Digital Pre-distortion
 ACM Hitless ACM
 User interfaces
 Ethernet interfaces DT 1× GEth RJ45 (PoE), 1× SFP or 1× SFP + 2× SFP+ port
 Ethernet interfaces ST 1× GEth RJ45 (PoE), 1× SFP or 2x SFP port
 Maximal packet length 16000 bytes 
 Management and Features
 Management Web interface, SNMPv2/v3, SSH, Telnet, USB/WiFi service access
 Supports  SyncE, PTP1588v2, 802.1q (VLAN tagging), 802.1p (priority queuing), 802.1ad (Q-in-Q ), G.8031, G.8032, G.8131, G.8132
  Connectivity Fault Management (CFM), per IEEE 802.1ag; Ethernet OAM, per ITU-T Y.1731; · Ethernet in the First Mile OAM, per IEEE 802.3ah
  Ethernet Local Management Interface (E-LMI), per MEF (Metro Ethernet Forum), Syslog, Radius
 ODU connection
 Cable type  S-STP/S-FTP Cat. 7 cable up to 100 m length, optical fiber
 Cable length  Up to 90 m for Ethernet 1000Base-T, up to 100 m for 100Base-TX and up to 250 m for 10Base-T
 Optical cable  Fibre optic cable is determinated by used SFP module
 Antennas
 Interface Standard RBWN/CTT
 OMT Built-in replaceable (DT) or external (ST)
 Class ETSI Class 2 or Class 3
 Polarization Vertical or horizontal / Dual polarization
 Power supply
 Power supply 36 – 60 VDC, PoE or direct
 Environmental
 Operating temperature (Outdoor unit) -33 to +55 °C
 Ingress protection IP67 / All Weather
 Dimensions and weight
 Dimensions (cm) 23 × 22.5 × 11.4 (ST), 22.6 × 22.1 × 11.6 (DT)
 Weight (kg) 6.1 (ST), 9.2 (DT)